APC RBC Replacement Battery
We supply APC RBC Replacement Battery Cartridge 1 to 155 Cartridge. Replacing of APC RBC cartridges are enables the standard APC runtime and its protect the UPS. Using of a non-APC RBC battery may result in lower runtime, damage the UPS, create hazardous conditions, or void safety certifications on the UPS.
APC RBC Replacement Battery Cartridges is to provide replacement battery packs in APC UPS Uninterruptible Power Supplies. This range consists of Replacement Battery Cartridges that range in capability from 3.2 Ah to 330 Ah as per UPS Models and its ratings. Using of a non-APC RBC battery may result in lower runtime, damage the UPS, create hazardous conditions, or void safety certifications on the UPS.
The APC RBC Replacement Battery Cartridge product range is manufactured at a Schneider Electric production site on which an ISO14001 certified environmental management system has been established.
The battery packs within this product range are designed to conform with the requirements of the Battery and Accumulator Directive (European Directive 2006/66/EC of 26 September 2006) and do not contain, or only contain in authorized proportions, the regulated substances lead (Pb), mercury (Hg) and cadmium (Cd) as mentioned in the Battery Directive. Additionally, the non-spillable, valve regulated lead acid batteries used in the battery pack(s) within this product range are certified by their manufacturers as capable of withstanding the IATA/ICAO Vibration and Pressure Differential Test and that at a temperature of 55 degrees Centigrade, there is no free electrolyte to flow from a ruptured or cracked case.
Products of this range are designed in conformity with the requirements of the European RoHS Directive 2011/65/EU and do not contain, or only contain in the authorised proportions, lead, mercury, cadmium, hexavalent chromium or flame retardants (polybrominated biphenyls – PBB, polybrominated diphenyl ethers – PBDE) as mentioned in the Directive
At end of life, the products in the Replacement Battery Cartridge product range have been optimized to decrease the amount of waste and allow recovery of the product components and materials. This product range contains batteries that should be separated from the stream of waste so as to optimize end-of life treatment by special treatments. The location of these components and other recommendations are given in the End of Life Instruction document which is available for this product range on the Schneider-Electric Green Premium website